Short answer: The codes we see most on Hondas, Toyotas and Nissans are P0420 for catalyst efficiency, P0171 for a lean condition, P0300-series codes for misfires, P0455 for an EVAP leak and P0128 for a thermostat that warms up too slowly. Each points to a system, not a single part.
By the Bay City Automotive team · Reviewed by shop technicians · Last updated

P0420 and P0171
P0420 means the catalytic converter is not storing oxygen as it should, which may be the converter or an exhaust leak or sensor issue. P0171 means the engine is running lean, often from a vacuum leak, a dirty airflow sensor or a weak fuel pump.
P0300 to P0306
These identify a random or specific cylinder misfire. We swap coils between cylinders, check plugs and test compression to see whether the misfire follows a part or stays with the cylinder.
P0455 and P0128
P0455 is a large EVAP leak, often a gas cap or vent hose. P0128 means coolant is not reaching temperature in time, usually a stuck-open thermostat that also reduces heater output and fuel economy.
How Bay City Automotive handles this
A check-engine light means your car's computer has detected a fault. At Bay City Automotive we read the code, test the system to confirm the cause and explain the repair in plain English before any parts are replaced.
Learn more on our check-engine diagnostics page, or call (408) 942-5488 and a technician will explain your options before any work begins.
Key takeaways
- P0420 and P0171.
- P0300 to P0306.
- P0455 and P0128.
Frequently asked questions
Can one problem cause several codes?
Yes. A single vacuum leak can set lean codes and misfire codes together, which is why we look at all codes as a pattern.
